welcome to our website

XC Controller

Entry-level residential controller with extra flexibility, features, and memory.

The new Hunter XC presents handy water management control in a compact, user-friendly controller that is capable of meeting the irrigation requirements for a wide range of residential landscapes. Simply put, the XC brings a whole lot extra to a small controller. Like extra power…the XC offers a choice of 2-, 4-, 6-, and 8-station models, each with plenty of might to operate one or two valves per station plus a pump start relay or master valve.

Extra features…including global seasonal adjustment and a 365-day calendar to make water savings easier, plus a default system that permits retrieval of the original program entered into the controller. Extra flexibility…with three programs (each with four start times), multiple scheduling formats, and the ability to select sensor input by station. And extra memory…with a non-volatile on-board program backup and a high-energy lithium battery for timekeeping to assure you’ll never have to reprogram the controller due to power outages. The choice for those who demand outstanding reliability, the XC is where to turn for extra peace of mind.

XC MODELS

XC-200i/201i – 2-station indoor controller
XC-400i/401i – 4-station indoor controller
XC-400/401 – 4-station outdoor controller
XC-600i/601i – 6-station indoor controller
XC-600/601 – 6-station outdoor controller
XC-800i/801i – 8-station indoor controller
XC-800/801 – 8-station outdoor controller

DIMENSIONS

• Indoor Model: 6 1/2" H x 5 3/4" W x 2" D (16.5 cm H x 14.6 cm W x 5 cm D)
• Outdoor Model: 8 5⁄8" H x 7" W x 3 3/4" D (22 cm H x 17.8 cm W x 9.5 cm D)

OPERATING SPECIFICATIONS

• Outdoor models, transformer with internal junction box
• Indoor models, with plug-in transformer
• 3 programs, A, B, C
• Start times: 4 per day, per program for up to 12 daily starts
• Station run time: 0 minutes to 4 hours in 1-minute increments
• Day schedule: 7-day calendar true odd/even programming with 365-day calendar clock, or interval watering (up to 31 days)
• AM/PM or 24 hour clock option
• Automated chronological ordering of start times/start time stacking
• One-button manual start and advance
• Seasonal adjust: 0% to 150%
• Transformer input: 120VAC, 60 Hz (domestic model)
• Transformer output: 24VAC, 1.0 amps (capable of operating equivalent of 3 solenoids simultaneously)
• Station output: .56 amps
• Electronic short circuit detection
• Battery: 3V lithium (included) for remote programming and timekeeping, not required for program backup
• Programmable delay between stations
• Rain sensor bypass switch compatible with microswitch based sensors, displays when sensor is active
• Programmable sensor input by station
• Original program can be saved in non-volatile memory and retrieved later if needed
• Programmable rain delay from 1 to 7 days
• Programmable event day off allows specific day(s) to be designated as always “off”
• Hunter Quick Check™ helps troubleshoot field wiring issues
• Test program feature allows for quick system checks
• UL Listed/CE Approved

SPECIFICATION GUIDE
EXAMPLE: XC - 601i - E
MODEL XC-2 = 2 stations (indoor model only) XC-4 = 4 stations XC-6 = 6 stations XC-8 = 8 stations	TRANSFORMER 00 = 120V 01 = 230/240V	INDOOR/OUTDOOR Outdoor Model Standard, unless “i” noted for Indoor Mount (see below) i = Indoor Model	OPTIONS A = Australian Markets 240VAC (Outdoor Model Supplied with Cord) E = European Markets 230VAC

Designed and developed by: Metlasoft